Online Design Form - Nerve Cuff

The Nerve Cuffs are made out of biocompatible materials, they are mechanically flexible and can be provided in many geometric configurations and a wide range of sizes.

Nerve Cuffs can be used for acute or chronic experiments.

The number of contacts, distance between them, the inner diameter are all custom designed.

Fields marked with (*) are required

Contact Information

Enter the Contact Person’s Name.
Enter a valid email.
Enter a valid phone number
Enter your Institution name.
Enter the Street, City, State, and Zip Code (If apply).
Enter the Principal Investigator’s name.
Please type Name on Quote (if not contact person)

General Specifications

Standard Nerve Cuff
  • d. Inner diameter.
  • x. Spacing between contacts.
  • n. Number of contacts.
  • y. Distance from the end of the contacts to the end of the cuff.
  • s. Teflon insulated stranded Stainless Steel lead.
  • Stranded Stainless Steel leads teflon insulation 300mm long (typical).
Typical Specifications
Variable Description
y Three times distance between contacts, to provide maximum isolation.
s 300 mm long
Standard (1.0 - 5.0 mm i.d.)
Contact material & thickness d=inner diameter (i.d.)
* Recommended for stimulation
125 µm stranded Stainless Steel 1.0 - 5.0 mm
100 µm Platinum 1.0 - 2.0 mm
* 250 µm Platinum 2.0 - 5.0 mm
Microcuffs (0.75, 0.5 and 0.3 mm i.d.)
Contact material & thickness d=inner diameter (i.d.)
100 µm Platinum 0.5 & 0.75 mm
50 µm Platinum/Iridium 0.3 mm
Nanocuffs (56 - 250 µm i.d.)
Contact material & thickness d=inner diameter (i.d.)
25 µm Platinum/Iridium 160 - 250 µm
12.5 µm Platinum/Iridium 56 - 140 µm
Invalid Input
Question 2 will be available only after answering question 1
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Value out of range.
Numeric value
Numeric value
Invalid Input
Numeric value
This field is required
This field is required.
Invalid Input
Invalid Input
This field is required.

Connector and Headstage

This field is required
Connectors image
This field is required
Invalid Input
This field is required

Your Custom Design and Layout Sheet

If your requested design cannot be fully described by the questions above, please attach a description here. Make drawing as clear as possible:

Invalid Input

Accessories and Additional Services

This option is no longer available
Invalid Input
Invalid Input
Invalid Input

Application Description (Optional)

Invalid Input
Invalid Input
Invalid Input
Invalid Input

About Your Order

Numeric Value
See Terms and Conditions for details
Invalid Input
Invalid Input
If you will like to discuss any other technical aspect of your design please contact us via email at support@microprobes.com Thank you!
QMF 61 - Digital version - Master with QMS representative
Revision 05-040720