The model TIP-105 titanium pedestal
has been developed to house a single
Omnetics nano connector (model num-
bers A8141-001, A8784-001, A8828-
001 or equivalent) used in the fabrica-
tion of our Floating Micro-electrode
Arrays (FMA). It may also be used with
similarly designed chronic electrode
systems that utilize the same connector
type.
The titanium pedestal incorporates a silicone
gasket and titanium lid, which is attached
using 0-80 Allen Head Screws, so that when
moisture and airborne debris are unable to
contaminate the connector contacts. The two
mm in diameter)
extending from the sides allow for easy fixa-
tion of the pedestal to the skull using cranial
screws and cement. The connector is sealed
at the bottom of the pedestal with a bio-
compatible epoxy.
MicroProbes for Life Science recommends in-
house installation of the connector to the ped-
estal prior to shipping. However, the pedestal
is also sold as a standalone unit if the investi-
gators opt to attach the connector themselves
to the FMA, or have other applications. The lid
screws and an Allen wrench are included as
well as an extra silicone gasket.
Pricing:
For the A8141-001:
TIP-105-IN with installation of FMA
TIP-105
For the A8784-001:
TIP-107-IN with installation of FMA
TIP-107
For the A8828-001:
TIP-109-IN with installation of FMA
TIP-109
GKS-101 Silicone gaskets - pkg. of 5 plus lid screws - pkg. of 4
|
|
Orientation of electrodes have been rotated for demonstration purposes only
|
